Browsed by
Category: Status Reports

Publication Eve

Publication Eve

As of this evening, The Curse of Steel has been fully prepared as a KPF-format e-book and is about three steps short of being released.

I’m not going to try to publish it tonight. I want to review the whole e-book one final time to make sure there are no last-minute errors, and that may take me a little while. Especially since I have a pile of telework to get done for my office over the next couple of days.

Still. Everything has been loaded into the Kindle Create app, and it looks very nice indeed. This is starting to feel like a real event. The book will almost certainly be released by Wednesday of this week.

Status Report (1 October 2020)

Status Report (1 October 2020)

I’m still working on the next step in the Architect of Worlds design sequence.

This one is proving a bit thornier than usual, because I’m trying to model a very complex system. This step is doing a lot of the heavy lifting to describe the geology of a world. I need something that can handle Earth’s complex plate-tectonics geology, and the stagnant-plate geologies of Venus and Mars, and the mega-vulcanism of Io, and putative super-Earths, and can also handle long stretches of geologic time, and and and. Tall order . . . although I think I’m converging on something that will work well enough. A few more days of work on that, most likely, and then the next block of draft text will appear here.

Meanwhile, as of today the editor I hired to review the draft of The Curse of Steel has finished his work, and his assessment was both useful and very positive. The big takeaway here is that he’s confirmed my belief that the current draft does not need any more major surgery. I estimate about two more weeks of work, to finish the glossary, go through the draft one last time to pick a few more nits out of the prose, assemble the e-book files, and publish.

The Curse of Steel will almost certainly be available on Kindle Direct by the middle of October. At the point of release, anyone who’s signed up as my patron at the $2 level or above will receive a free copy of the e-book, and anyone who’s signed up at the $5 level or above will be mentioned in the Acknowledgements section of the book.

After which, I plan to spend about three days in unashamed celebration, and then it will be time to get to work on the next book in the series: The Sunlit Lands.

Dependencies in a Model

Dependencies in a Model

Still working on the next sections of Architect of Worlds.

What’s interesting is that we’re coming to a number of items that fall into a web of dependencies. Some items affect the most likely outcome of others, and it’s not a nicely linear process. Just to give you a sample, here’s some storyboarding I’ve been doing using the Miro application online:

Where this mostly comes into play is with the order that the steps need to come in the design sequence. Fortunately, I have yet to come across any dependency loops. As long as the sequence moves more or less left to right, everything should work properly . . .

Architect of Worlds: The Next Chunk

Architect of Worlds: The Next Chunk

While I’m waiting for my consulting editor to have a look at The Curse of Steel, I’ve turned back to a project that I’ve been neglecting for too long: the world-building book Architect of Worlds. Several sections of that book already exist in a rough draft, which can be found at the Architect of Worlds link in the sidebar.

The bulk of the material I’ve already written is a design sequence, permitting the user to set up fictional star systems (or to fill in details for real-world systems). The idea is to let SF writers, game designers, tabletop game referees, and so on design locations for interstellar SF settings, using whatever combination of random chance and deliberate choice they prefer. The emphasis is on “hard SF” realism, as far as the state of exoplanetary astronomy will permit, and no dependencies on any specific tabletop rules system.

So far, the draft system permits one to place stars, planets, and moons, and get gross physical properties (mass, density, surface gravity) and dynamic parameters (orbital radius, eccentricity, and period) for each.

The next slice of the system will involve generating the surface conditions for such bodies, at least for the small “terrestroid” worlds that are likely to provide environments for SF adventure. At this point we’re talking about things like surface temperature (average and variations), atmospheric composition and pressure, the amount and state of water (or other volatiles) on the surface, what kind of native life might be prevalent, and so on.

I’ve been mulling this section over for a few years now, since the science involved is a lot more complicated and more difficult to reduce to a set of game-able abstractions.

When I designed a system like this for GURPS Space Fourth Edition, I made a deliberate design choice to reduce all the possibilities to a specific set of archetypes. That provided some backward compatibility with earlier versions of the GURPS system, and with the older Traveller systems that were an inspiration for both. For this book, though, I want to give the readers as much detail as I can, and let them decide what to use and what to set aside. That complicates the design.

So, a very rough overall outline of what’s going to be involved for a given “world” (that is, a terrestrial planet or moon with some likelihood of a solid surface):

  • The rotation rate of the world (including cases where the world is tide-locked or resonant with a primary). As a sidebar, this gives us quantities for the length of the natural day, month, and year.
  • The blackbody temperature and incidence of stellar wind for the world, based on the properties and distance of its primary star.
  • The strength of the world’s magnetic field, and the consequences for the size and strength of its magnetosphere (if any). If the world is a moon (for example, the satellite of a gas giant planet), then the primary’s magnetic field and magnetosphere may be relevant as well.
  • The world’s initial budget of volatiles – how much in the way of possible liquid or gaseous compounds was the world left with after its process of formation.
  • Atmospheric composition – what volatile compounds are likely to be gaseous at local temperatures, and can the planet hold onto them?
  • Atmospheric mass and pressure.
  • Hydrospheric composition – what volatile compounds are likely to be liquid or solid instead?
  • Hydrospheric mass and prevalence – how much of the world’s surface will be covered by what kinds of liquid or solid stuff?
  • Average surface temperature.
  • Estimated variations in surface temperature with the position on the surface, time of day, and so on.
  • Presence and complexity of native life – which may require a loop-back to adjust characteristics of the atmosphere, hydrosphere, and surface temperature.

All that’s the minimum for what the next section of the book needs to cover. There are a lot of dependencies back and forth here, which is one reason why I’ve struggled for so long to build this piece. I’m beginning to think I see how to design something workable, though. At least enough to get started. More over the next few weeks.

Editing the Novel

Editing the Novel

My plans regarding The Curse of Steel have evolved with remarkable speed over the past few days.

My novel-writing process seems to boil down to the following:

  • A long period of chaotic brainstorming, tinkering, and world-building work, in which the overall concept of the story can change many times. This stage can take several years and is likely to produce a lot of abortive partial drafts. Most of the novels I’ve worked on have never gotten past this point.
  • Eventually, the concept stabilizes in my head enough that I can produce the first complete draft of a novel. This has happened exactly three times in my entire career as a writer.
  • The first draft tells a complete story, but it probably has all kinds of plot holes, undeveloped characters, and vagueness of setting in it. After all, I was making it up as I went along – I seem to be much more a “pantser” than a “planner.” So now I go back and write a second complete draft, one that rounds out the story and patches most of those holes.

About eight years ago, my first mature original novel reached that second-draft stage. That was The Master’s Oath, a tale of time travel, alternate histories, and Hermetic magic that will absolutely never be seen again outside my dead files. It wasn’t until I was finished with that one that I had a “What in God’s name was I thinking” moment and realized the thing was utterly unpublishable. Decently written, not a bad adventure story, but bound to mortally offend big chunks of my audience. Lesson learned.

Now, as of last week, The Curse of Steel has reached the second draft stage. Lo, the creator looked upon his work, and he was pleased.

Now what?

Well, to be honest, my workflow doesn’t exist yet past this point. The Curse of Steel is the first original novel I’ve ever written that I honestly believe is publishable.

I spent a couple of weeks putting together a cover image for the book. While I worked on that, I thought about what the next steps should be. Should I just publish the second draft as is, and hope for the best?

The more I thought about that, the less comfortable I was with the idea.

I know my prose style is reasonably clean. When I was a freelance writer, more than one editor remarked on that. As an editor, I’ve seen enough prose from other people to be able to compare.

Meanwhile, I’ve had a few people reading my drafts, and they’ve been encouraging about the story.

On the other hand, a novel is a very different beast from a non-fiction book, there are necessary skills I may not have developed in full, and none of my early readers are experienced editors. I don’t have a decent writer’s circle to help me hammer my drafts into submission. What if I’m missing something?

No, scratch that, I know I’m missing something. Maybe two or three novels from now, I’ll have a better idea of what to do at this point. Right now I’m still not sure.

The obvious solution would be to hire an editor.

Of course, a skilled and reliable editor costs money. Not to mention, there are a lot of people out there ready to take advantage of would-be authors, offering cheap book-preparation services for top dollar without any guarantee of results. Ever since deciding to pursue self-publishing, I’ve been very cautious about laying out cash for such services.

On the gripping hand, I can afford to spend some money on the experiment.

So over the past week or so, I’ve done some research and developed two lines of attack.

One line is to search for software that can help a novelist pick nits in his prose style. Sure, everything has a spelling-and-grammar checker these days, but strong prose writing needs more than that. I need to be able to ferret out filler words, excess adverbs, phrases that I repeat too often, that kind of thing. I could do that by eye, but the process would be slow and painful, and I would be likely to miss the weaknesses in my own style.

Enter AutoCrit.

Autocrit is billed as a “self-editing platform,” and it certainly works as such. It’s essentially a web-based word processor, but it’s specifically designed to carry out a wide variety of specialized text searches and basic statistical analyses. It compares your text to a huge corpus from published novels, helping you find and carve out the flabby bits of your prose.

Using AutoCrit over the past three days, I’ve been able to rework The Curse of Steel with surprising speed and efficiency. Already I’ve cut a little over 2000 words of material, mostly filler words and repetitive phrases that didn’t add to the sense of each passage.

It’s been quite the eye-opener. Every writer needs something to rub his nose in the shortcomings of his prose style, or he isn’t likely to improve. Lacking an editor or a ruthless critique circle, something like this may be the next best thing.

AutoCrit isn’t ideal. It’s web-based, which I don’t care for. It chokes if you hand it more than 50,000 words of text at once, which means I have to edit my novel in chunks. It doesn’t handle special characters gracefully, so all my conlang words that have accents and umlauts in them get snarled up. Its import from Word, and its export back to Word, are both a little kludgy.

Still, I suspect I’ll have a third complete draft, with much tighter prose, by later this week.

The second line of attack is that I have, indeed, hired an editor. This involved a fair amount of searching through the Web, looking for editorial networks that are competent, reliable, and not outrageously expensive. The SFWA site was fairly helpful here – they don’t explicitly recommend editors, but they have an excellent checklist of things to consider in the process.

The editor I ended up with is being hired specifically to do a manuscript assessment, not a complete edit of the novel. This will set me back a few hundred dollars, and it may not end up being part of my usual workflow in the future. Still, the experiment should be worthwhile. I’m hoping he’ll be able to provide actionable feedback that I can use while producing a final complete draft – the last step in my development process before the book goes out the door.

At the moment, the plan looks like this:

  1. Finish working through The Curse of Steel with AutoCrit (to be completed by about 21 or 22 August).
  2. Wait for my editor to complete his review of the draft (probably about the end of September).
  3. Produce the final release draft (to be completed by late October).
  4. Publish the book!

So it looks as if The Curse of Steel will finally hit the virtual shelves by Halloween. There will be much rejoicing . . . and then I’ll get started on The Sunlit Lands, the second book in the series. One assumes that one won’t take nearly as long to reach fruition.

In other news, that four- or five-week gap in September, while I wait for my editor to finish his task? I think I may sit down and work on Architect of Worlds for a while. No promises . . . but I think my research, and the subconscious work in the back of my head, have reached the point where I may be able to develop a rough draft of the third chunk of the world design sequence. We’ll see how things go.

The Curse of Steel: Second Draft Finished!

The Curse of Steel: Second Draft Finished!

With the cover art ready to go, I’ve spent the last couple of weeks focusing on day-job work (writing and editing course material that’s going to go online) and working on the second-draft edits for The Curse of Steel.

That latter task has paid off. As of this afternoon, the novel is complete in the second draft.

What this means for the project is that I’m about to do one last editing pass, and then prepare the manuscript for release as a self-published novel. If all goes well, the novel will be released sometime in September. The one wild card is that I’m considering submitting the current draft for a manuscript assessment from a reputable freelance editor, to help me organize and direct that last editing pass. If I decide to go with that plan, that might delay the release a bit, depending on how long the assessment takes and how deep an edit it suggests I make.

In the meantime, though, the last chunk of the second-draft manuscript will be released to my patrons within a few days as the charged reward for August. All of my patrons, from the $1 level up, will get a copy of the last eight chapters of the draft (about 24,800 words). When the novel itself is released, all of my patrons from the $2 level up will get a free copy.

I’ll probably also release another piece of short fiction later this month, for my patrons and in the free-fiction section of this blog. More about that as we get closer to the end of the month.

Status Report (18 July 2020)

Status Report (18 July 2020)

Just a quick note today. I’ve started work on developing a cover image for The Curse of Steel. The first step was to update my model for Krava, adding muscle mass and definition, and changing her hairstyle to something more characteristic of an Iron Age culture.

To make sure the character herself looked right, I did a nude study: front and back renders of the character model in a neutral pose and without clothing. The results were pretty encouraging.

I won’t post the image here since there’s no way for me to mark it as mature content, but here’s a link to the DeviantArt page for the final image.

Status Report (13 July 2020)

Status Report (13 July 2020)

Hmm. Small change in plans.

As I mentioned yesterday, I’ve been ripping right through the second draft of The Curse of Steel. My pace has picked up a lot over the past week or so. This is mostly because I’ve reached the later chapters – at this point in the first draft, I had figured out most of the plot, so the second draft has needed a much lighter rewrite.

As of this morning, I’ve reached the major reversal in the plot, about two-thirds of the way through the story. This strikes me as a good place to pause for a bit, while I concentrate on other tasks. In particular, I really need to put some time and effort into a book cover.

As a result, this month’s charged release to my Patreon will take place within the next couple of days, consisting of roughly 18 chapters of the revised draft of The Curse of Steel. All of my patrons, from the $1 level up, will get a copy of the PDF. If you’re interested in signing up as a patron and seeing this draft as it emerges, feel free to click on the Patreon link in the sidebar.

Once that release is out, I’m going to crack open my modeling and photo-manipulation software and see if I can’t put together a decent book cover for The Curse of Steel. That will probably involve a few preliminary renderings as I set things up. I’ll post those here and to my DeviantArt page.

Status Report (12 July 2020)

Status Report (12 July 2020)

It’s a paradox.

Over the past few weeks, I’ve finally started to feel seriously worn down by months of lockdown amid the pandemic. I spend 95% of my time, day and night, in the same room. My bed and my workstation are less than four yards apart. My whole experience of the world is reduced to what I can see with a few networked devices. I do get to spend a little time each day at the kitchen table with my wife and children, and every day or two I go outdoors to walk for a mile or so in the fresh air. That’s all – and even for me, introverted and reclusive as I normally am, it’s starting to be difficult.

Even so, I’m surprisingly productive right now.

I’m in the process of rewriting one of my courses almost from scratch, with an eye toward being able to deliver it online rather than in the classroom. Very good progress so far, and the project may be done in a couple more weeks. I’m being called upon to consult with colleagues about other items too.

Meanwhile, I’m just tearing through the second draft of The Curse of Steel. There are a few new passages in this draft, and that slows me down a bit, but by and large, it’s just rewriting. I think I’ve averaged a chapter a day for over two weeks now. At this rate, I may have the bulk of the second draft done by the end of July.

I think I may need to start seriously thinking about a book cover. Finish the second draft, make one more edit-and-polish pass for the final draft, and the book will probably be ready to release sometime in September.

Status Report: 26 June 2020

Status Report: 26 June 2020

The last two weeks have been busy.

After almost three months of lockdown at home, I’m finally starting to do a significant amount of telework for my day job, revising and re-designing one of my more popular courses. We’re hoping to get that online for students by the end of July, so there’s a lot of work to be done there.

Meanwhile, I’ve gotten a good start on the second draft of The Curse of Steel. The goal here was to back the beginning of the story up by about two days, giving me a chance to do a lot more character development and exposition before throwing Krava into the middle of the action. I’ve just finished the third chapter of this new material, after which I’m going to be rewriting existing text rather than coming up with new.

I think it’s clear that I was overly optimistic to think that I would be one-third of the way through the draft by now. By the end of June, it’s probably going to be more like 15% or so. Still, I’ll have more than enough material to get past my self-imposed limit of “at least 10,000 words of solid content before I release anything to my patrons.”

All of which is to say, there will be a charged release on my Patreon by the end of June, which will consist of roughly the first 5-6 chapters of the revised draft of The Curse of Steel. All of my patrons, from the $1 level up, will get a copy of the PDF. If you’re interested in signing up as a patron and seeing this draft as it emerges, feel free to click on the Patreon link in the sidebar.